5G Module Series
RM510Q-GL Hardware Design
RM510Q-GL_Hardware_Design 68 / 88
Figure 32: Specifications of Mating Plugs Using Ø0.81 mm Coaxial Cables
The following figure illustrates the connection between the receptacle RF connector on the module and
the mating plug using a Ø0.81 mm coaxial cable.
Figure 33: Connection between RF Connector and Mating Plug Using Ø0.81 mm Coaxial Cable
The following figure illustrates the connection between the receptacle RF connector on the module and
the mating plug using a Ø1.13 mm coaxial cable.
To Next Page
Loading...
