5G Module Series
RM520N-GL_Hardware_Design 12 / 84
1.3. Special Mark
Table 1: Special Mark
CE Statement
Regulatory Conformance
Hereby, [Quectel Wireless Solutions Co., Ltd.] declares that the radio equipment type [RM520N-GL] is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.quectel.com
The device could be used with a separation distance of 20cm to the human body.
UK Statement
Regulations 2017 (SI 2017/1206)
Declaration of Conformity
Hereby, [Quectel Wireless Solutions Co., Ltd.] declares that [RM520N-GL] is in compliance with the
essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI
2017/1206).
Product Marketing Name：Quectel RM520N-GL
FCC Certification Requirements
According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a
mobile device.
And the following conditions must be met:
1. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna
installation and operating configurations of this transmitter, including any applicable source-based
timeaveraging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion
Requirements of 2.1091.
2. The EUT is a mobile device; maintain at least a 20 cm separation between the EUT and the user’s
body and must not transmit simultaneously with any other antenna or transmitter.
3. A label with the following statements must be attached to the host end product: This device contains
Unless otherwise specified, when an asterisk (*) is used after a function, feature, interface,
pin name, AT command, or argument, it indicates that the function, feature, interface, pin,
AT command, or argument is under development and currently not supported; and the
asterisk (*) after a model indicates that the sample of the model is currently unavailable.
To Next Page
Loading...