Quectel RM520N-GL - Assemble Coaxial Cable Plug with Jig

5G Module Series
RM520N-GL_Hardware_Design 66 / 84
The illustration of pulling out the coaxial cable plug is shown below, θ = 90° is acceptable, while θ ≠ 90° is
not.
Figure 31: Pull out a Coaxial Cable Plug
5.3.4.2. Assemble Coaxial Cable Plug with Jig
The pictures of installing the coaxial cable plug with a jig is shown below, θ = 90° is acceptable, while θ ≠
90° is not.
Figure 32: Install the Coaxial Cable Plug with A Jig