Quidel Sofia - System Display and Keypad; System Display; System Keypad

Page 14 of 57
Installation Pack
 User Manual
 QuickStart Guide
 Warranty Card
 Barcode Scanner
 Barcode Scanner Stand
 SD Card(s) – Test Type Files (Blue), Language Files (Yellow),* and Blank SD Card
 Calibration Cassette
For components supplied with Virena, refer to the Sofia Surveillance Mode Installation
Instructions.
Contact Quidel Technical Support for additional supplies at 800.874.1517 (in the U.S.). See page 4
for additional contact information.
Sofia consumable test kits, including Test Cassettes and External Quality Control materials, are
shipped separately.
Consult your Quidel representative for a listing of approved Sofia assays.
*Language Files (Yellow) may not be provided in the Installation Pack. If needed, contact Quidel
Technical Support.
User Types
Users/Operators without Supervisor authorization have access to the following functions:
User/
Operator
 Power on Sofia
 Perform Calibration
 Run QC (External Controls)
 Run Test with Patient Samples
 Review Data (Calibration and QC)
Instructions for these basic User functions are provided in the Basic User Instructions section.
Operators with Supervisor authorization access can perform all of the following functions:
Supervisor
(Must have a valid log-in
to access supervisor menu.)
 Load Test Types
 Add or Delete Users
 Load and Save Settings
 Save Test Records
 Update Sofia Firmware
 Load Languages
 View User History
 View Message Logs
 Review Patient Results
 Review Statistics
 Change Settings