QUORION QMP 2000 series User Manual

13
3. Before you start
3.1 Setting up the cash register
Place the QMP 2000 series on a stable or even surface. Use it only within the operating temperature range
(see technical data) and protect it from splashes and high humidity.
The QMP 2000 series come with an external power supply. First, please check if the specifications printed
on the label fit your local voltage. If so, connect the power pack to the QMP 2000 series. The power plug is
at the rear next to the interfaces. Now connect the power supply with the power circuit and turn on the
QMP 2000 series with the main switch.
The QMP 2000 series will now load the operating system and automatically launch the cash register
program. You may immediately start working with your new system.
3.2 Installing a paper roll
Warning!
Risk of hand injury caused by printer cutter.
– Switch of the cash register before you install the paper roll.
1. Open the cash registers printer cover.
2. Push down the printer release lever to unlock the printers easyload base.
 The printers easyload base dissolves from the printer unit.

QUORION QMP 2000 series Specifications

General

Brand	QUORION
Model	QMP 2000 series
Category	Cash Register
Language	English