5.2 Register a Department
Department keys may be used either to enter free prices or to select PLU’s from a list. If you press a
department key without entry, you will see a list with all PLU’s which are linked to that department. Use
the scroll keys or enter a number to select a certain PLU from that list.
If you wish to register an undefined price for a department, just
enter the price with the numeric keys and press the respective
department key.
Example: Register 2.00 EUR in department 3:
5.3 Register Pre-Programmed PLU’s
Pre-programmed PLU’s are registered by entering the respective number on the PLU key. The pre-
programmed price and the description are now read from memory. Alternatively, you may also program
direct keys for certain PLU’s on the keyboard. You only need to press one key for registering a PLU.
If you are working with scan codes, you may either enter the
code number by keyboard or use a barcode scanner. In that
case, you do not need to press any additional key – the PLU will
be registered directly.
Example: Register PLU number 123:
5.4 Enter a New Price
It is possible to change the price of a PLU for a transaction. Simply enter the new price and press the key
“New price” before entering the PLU. This is valid for both scanning as well as manual entry.
Example: Register PLU number 1 with new price of 2.00 EUR:
New
price
PLU
To Next Page
Loading...
Need help?
General
