8. Using Shift Levels
8.1 PLU/Department Shift
The PLU/department shift is a preset function to switch all article- and department keys to a second level.
This is done by adding a pre-programmed offset to the actual PLU or department number. Please note that
the shift is valid for the very next item, it will be automatically reset after entry. It is also possible to block
the shift for either PLU’s or departments.
8.2 Price Shift
The QMP 2000 series allows for more than one sales price for each PLU. This is a useful function for special
occasions, such as Happy Hour or item promotions. You may program an automatic price shift based on a
time period or manually change the price shift via key entry.
First select the price level by pressing the corresponding key. Then, enter the PLU. Depending on the
programming the price level will be reset automatically after an item, a transaction or not at all. In that case
you must reset the price level manually by choosing another keyboard level.
By using price levels it is also possible to realize tax shifts. In such a case the second price level has the same
price but a different tax rate.
Example: Shift to price level 2 and register PLU 1:
8.3 Tax Shift
As an alternative to the tax shift via price levels, there is a preset function to activate or deactivate certain
tax rates directly.
Just press the corresponding “Tax” key to activate or deactivate a certain tax rate.
Depending on the programming the tax shift will be reset
automatically after an item, a transaction, or not at all. In that
case you must reset the tax manually by pressing the respective
tax key again.
Example: Shift to tax 3 and register PLU 1:
Tax
shift 3
To Next Page
Loading...
Need help?
General
