QUORION QMP 2000 series User Manual

21
5.5 Create a PLU during the Sale
Occasionally, a clerk may have to enter a new item, which has not been programmed in the data base of
the POS. If this happens, the QMP 2000 series will automatically prompt you to create this item. Press the
“Sub total” key to confirm or the “Clear” key to exit the prompt.
Once confirmed the QMP 2000 series will ask you for the price. Upon entry of the price, press the “Sub
total” key again to confirm. Then enter the department to which the PLU is linked and press Subtotal to
confirm.
If the system has been programmed to allow for the creation of new PLU names during registration, you
will be asked to enter a name for the PLU. Alternatively, the PLU will assume the name of the department
that it is linked to.
After confirmation with the Subtotal key the new PLU will be stored in memory for future transactions.
Example: Create PLU number 123 – Coke – with price of 1.50 EUR, linked to department 3:
If the PLU is not yet programmed, you will be prompted to create it now:
1. Confirm and enter the price:
2. Enter the department link:
3. Enter the PLU name via keyboard (depends on programming):
Sub
total
E
K
O
C
Sub
total
Sub
total
3
0
5
1
PLU
3
2
1
Sub
total

QUORION QMP 2000 series Specifications

General

Brand	QUORION
Model	QMP 2000 series
Category	Cash Register
Language	English