9.6 Modifiers and Condiments
Some special articles need to be specified by supplying cooking instructions or additional items. To do that,
press the “Modifier” key directly after registering the PLU. Depending on the programming, it may also be
necessary to select a condiment. In that case you do not need to press the “Modifier” key, because the
condiment dialog will appear automatically.
Using the cursor keys, you can now select the desired
condiment and confirm with the “Modifier” key. When
required, you can also confirm with the “Multiplication” key. If a
PLU was ordered more than once, it is necessary to enter a
number for the condiment. Enter the desired number and
confirm with the “Multiplication” key. Thereafter, the request
will be continued for the remaining PLU’s. To confirm the
selection for all PLU’s, just press the “Multiplication” key
without entry.
Example: Register PLU 1 with modifier 3:
or direct entry:
Example: Register 2 x PLU 1 with compulsory condiment:
10. Reports
The QMP 2000 series offer a wide range of reports to collect and monitor your sales data. All functions of
the system have their own report memory in four periods. They can be checked separately as system
reports or combined as free programmable user reports. The report memory of each function does not only
contain the total sum, but also information about clerks and time periods.
All reports can be performed as X or Z. Both types contain the same information. The X-report can be
printed as a temporary report at any time, because the report data will not be cleared. The
Z-report is a final report – after printing the data, the report memory will be cleared.
To Next Page
Loading...
Need help?
General
