RADAC WaveGuide 5 - 3.2 User Authorization and Configuration Sections

Step 2. Become an authorized user
To modify the WaveGuide system’s configuration you need to be an authorized user. There-
fore, an authorization dialogue will appear when the user enters the configuration page.
The authorization will be valid for a duration of 30 minutes. However, the web browser may
store the login name and password. In that case, the authorization data will be submitted
automatically by the browser without a pop-up dialog. The default login password is
“radac”.
After successful authorization, the user can view and change settings. After submitting
any new settings a reboot dialog will appear. The settings will not be effective until the
WaveGuide sensor is rebooted.
Step 3. Configuration
The configuration page contains five sections as listed in Table 3.2.
Link Description
Date & Time For viewing and setting the system time.
Network For viewing and changing the network settings.
Sensor For viewing and changing the sensor specific settings and for view-
ing reflection diagrams.
Subscriptions To set up data export over the network.
Data Logger To view logged data.
Table 3.2: Description of configuration page sections.
16