RadiaCode 10 Series - 3.6 Indication: sound, vibration, light

14
© 2023 Radiacode Ltd.
Stand-alone use of the device
The "swing" buttons are locked.
USB communication has been established.
Bluetooth communication has been established.
All sounds are off.
Sounds included.
Level 1 alarm on Count Rate.
Level 2 alarm on Count Rate.
Count Rate over-range alarm.
Level 1 Dose Rate alarm.
Level 2 Dose Rate alarm.
Dose Rate over-range alarm.
Level 1 alarm on Dose.
Level 2 alarm on Dose.
Dose off-scale alarm.
Linear scale of the amplitude of the energy spectrum of photon radiation.
Logarithmic scale of the amplitude of the energy spectrum of photon radiation.
In the menu (enter by long pressing the round button), the sections are indicated by icons and text.
Settings
Instrument settings menu.
Spectrum
Display of the energy spectrum of radiation.
Monitor
Display the current dose rate or count rate.
Dose
Display of accumulated dose of photon radiation (gamma and X-ray).
Search
Search mode - display the count rate as a graph.
Power off
Turning off the device.
About device
Information about the dosimeter serial number and software version.
3.6 Indication: sound, vibration, light
In personal radiation detectorе Radiacode-10X series sound and vibration sources are built in to
acknowledge button presses and to indicate events and alarms. A light indication is provided for remote
monitoring
Sound can be accompanied by:
· switching the device on and off;
· pressing a button;