RadiaCode 10 Series - Reset to Factory Settings

28
© 2023 Radiacode Ltd.
Stand-alone use of the device
· Short press the round button to select
[Enter] or [Esc];
· Long press the round button to confirm your
selection;
o This will return to the previous menu level.
· To return to the previous level or exit the menu,
briefly press the up/down swing buttons to move
the focus to [< Back] or [<< Menu quit];
· Briefly press the round button to confirm your
selection.
3.10.10 Reset to factory settings
The menu provides an item for resetting the instrument to its original factory settings.
· Briefly press the up/down swing buttons to move
the focus to the item
· [Factory settings];
· Press the round button briefly to confirm your
selection;
· Short presses on the round button to select the
[Yes] or [No] field;
· Long press the round button to confirm your
selection;
o Confirming [Yes] will reset the instrument to its
original settings and return to the previous menu
level.
· To return to the previous level or exit the menu,
briefly press the up/down swing buttons to move
the focus to [< Back] or [<< Menu quit];
· Briefly press the round button to confirm your
selection.