RadiaCode 10 Series - 3.11.5 Device info; 3.12 Alarms

Stand-alone use of the device 33
© 2023 Radiacode Ltd.
o averaging time, price of one bar on the chart in seconds - 1/2, 1, 2, 4 seconds;
o current count rate value;
o count rate units - CPS or CPM;
o sign of exceeding thresholds on dose rate, dose rate, count rate level;
o audio indication status;
o Bluetooth or USB connection;
o swing buttons lock sign;
o battery status.
At the bottom of the screen from left to right:
o graphical representation of the current count rate.
o search graph of the count rate;
Using the buttons
Quick control in this mode is available via buttons:
o a short press on the upper swing button increases the averaging time;
o a short press on the lower swing button decreases the averaging time;
o long press on the lower swing button clears the screen and starts a new search session;
o long pressing the upper swing button turns the sound indication on and off.
3.11.5 Device info
The mode is intended for presenting brief information about the device:
· Instrument model and serial number;
· Firmware version;
· Bootloader version;
o FCC ID. *Not specified for all devices
3.12 Alarms
The sources of alarms in the Radiacode-10X series device are:
current value of count rate value;
current value of dose rate value;
value of accumulated dose;