RadiaCode 10 Series - 3.10.3 Dose rate - alarm levels

20
© 2023 Radiacode Ltd.
Stand-alone use of the device
3.10.3 Dose rate - alarm levels
· Briefly press the up/down rocker buttons to move
the focus to [Dose rate];
· Short press the round button to move
to [Dose rate].
· Short press the round button to move to
[Alarm 1];
· Short press the round button to select the
desired digit of the threshold value;
· Short presses on the up/down swing buttons to
change the value of the selected digit;
· Set all digits;
· Short presses on the round button to select
[Enter] or [Esc];
· Long press the round button to confirm your
selection;
This and deeper menu levels can be exited via [< Back] and [<< Menu quit].
or go to [Alarm 2].
· Short press the round button to move to
[Alarm 2];
· Short press the round button to select the
desired digit of the threshold value;
· Short presses on the up/down swing buttons to
change the value of the selected digit;
· Set all digits;
· Short presses on the round button to select
[Enter] or [Esc];
· Long press the round button to confirm your
selection;