80
Beyond the Basics
8. If you want to tag the ID, press TEXT, enter the
desired text tag for the ID. Then press ENT (see
“Text Input Chart”).
9. To store the next ID memory in sequence, press e
and repeat Step 7.
10. Press SCAN to start scanning.
If you made a mistake in Step 4, Invalid ID value
appears and the scanner beeps when you press
ENT. Start again at Step 3.
You can enter either a decimal or AFS code for
ED (EDACS) IDs. The default setting is decimal ID
entry. When you press FUNC then 2, AFS Format
appears for about 2 seconds. Now you can enter
the ID code with AFS format.
If you entered an ID code that is already stored in
another ID channel, Dupl. ID of X-XX appears. If you
want to store the ID code, press ENT. To cancel the
operation, press CLEAR.
To Next Page
Loading...
