Radio Shack REALISTIC PRO-2042 - Scanner Interface and Memory; Connecting Optional Equipment

CONNECTING OPTIONAL EQUIPMENT
CONNECTING AN CONNECTING
EXTERNAL SPEAKER HEADPHONES
You can connect an optional external
speaker with a 3.5 mm (Va-inch) plug to
the scanner. Use an 8-ohm external
speaker capable of handling over 2.5
watts of power (not supplied).
Insert the speaker’s plug into the EXT
SPKR jack on the back of the scanner.
Note: Plugging in an external speaker
disconnects the scanner's internal
speaker.
You can connect an optional pair of
headphones with a 3.5 mm (Vs-inch)
plug to the scanner. Use monaural
headphones.
Insert the headphones’ plug into the
A jack on the front of the scanner.
Note: Plugging in headphones discon¬
nects the scanner’s internal speaker.
11