Radio Shack REALISTIC PRO-2042 - Reviewing Locked-Out Channels and Frequencies; Deleting All Locked-Out Frequencies; Priority

• You can lock out as many as 200
frequencies. If you try to lock out
more than 200 frequencies, L-
FULL appears on the display.
Follow these steps to remove the lock¬
out from a frequency.
1. Press TUNE.
2. Repeatedly press L/O RVW until the
frequency you want to remove the
lockout from is displayed.
3. Press L/OUT. LOCK-OUT disap¬
pears from the display.
Reviewing Locked-Out
Channels and Frequencies
You can review the channels or fre¬
quencies you locked out.
To review the channels you locked out,
press MANUAL, then repeatedly press
L/O RVW. As you press L/O RVW, the
scanner displays all locked-out chan¬
nels.
To review the frequencies you locked
out, press TUNE, then press L/O RVW.
The scanner sounds two short beeps,
then displays L-r. As you rotate the
TUNING knob, the scanner displays all
locked-out frequencies. To return to
the tune mode, press L/O RVW again.
Note: As you review locked-out fre¬
quencies, the scanner beeps when the
display changes from the highest
locked-out frequency to the lowest
locked-out frequency.
Deleting All Locked-Out
Frequencies
You can delete all locked-out frequen¬
cies at one time.
1. Press TUNE, tune appears on the
display.
2. Press L/O RVW.
3. Press and hold down CLEAR, then
press LOCK-OUT.
PRIORITY
With the priority feature, you can scan
through programmed channels and
still not miss an important or interesting
call on a specific channel. You can pro¬
gram one stored channel as a priority
channel.
Note: Before you first program your
scanner, it automatically designates
Channel 1 in Bank 1 as the priority
channel.
Follow these steps to program a chan¬
nel as the priority channel.
1. Press PROGRAM.
2. Use the number keys to enter the
channel number you want to pro¬
gram as the priority channel, then
press PRIORITY. P appears on the
display to the left of the channel
number.