Radio Thermostat CT100 User Manual

CT100 Operation Guide
Customization
To Adjust Heat and Cool Programs
1. Select the Day
1
you want to
program. Touch the day of the
week area to cycle through
the days to the desired day.
2. Select the Time Slot
2
you
want to program. Touch the
time slot area to cycle through
to select the desired period.
3. Set the desired start time
of that time slot. Touch the
time arrows
3
to select the
desired period’s starting time.
Hold down time arrow for fast
time scrolling.
4. Select the desired target
temperature for that time
slot. Touch the Temperature
Adjust arrows
4
to select the
desired period’s temperature.
• Repeat Step 2 - 4 to set
remaining Time Slots.
5. Touch Copy Day
5
once.
The settings for the current
day will be copied to the next
day, which will appear on the
screen. Make any necessary
adjustments.
NOTE: Hold down Copy Day
for 3 seconds to copy to all 7
days.
6. Touch the Day fi eld until
Holiday
6
is displayed. Follow
steps 2-4 to defi ne how the
program should run when the
Holiday setting is enabled.
7. Touch
to return to the
Menu screen.
HOLIDAY
MORN
AM
F
COPY DAY
Tu
PROGRAM
COOL
TRUE AUTO
5
6
4
2
1
3
CURRENT PROGRAM’S
START TIME
TIME SLOT
PROGRAMMED
TARGET
TEMPERATURE
PROGRAM SCREEN
CURRENT MODE
Not Blinking = room at target temperature
Blinking = heating/cooling in progress
Modify Programs
45

Radio Thermostat CT100 Specifications

General

Brand	Radio Thermostat
Model	CT100
Category	Thermostat
Language	English