14. OTHER PARAMETERS
The user can set parameters which influence the scale operation.
They are gathered in the submenu <P5.othr> e.g. backlight and beep
signal. Enter this submenu <P5.othr> according to chapter 11.2.
14.1. Backlight function
Program recognises the way the scale is supplied (mains, battery)
and automatically selects the way of operating on the backlight:
bl – for mains,
blbt – for batteries or rechargeable battery pack.
14.1.1. Backlight for supplying from mains
Procedure:
• Enter the submenu <P5.othr> and then:
bL no
- backlight switched off
bL YES
- backlight switched on
bL Auto
- backlight switched off automatically if indication
becomes stable for about 10s
- 37 -
To Next Page
Loading...
