no – mode is disabled
YES – mode is enabled
Return to weighing:
See 10.2.2.
15.2. Selecting quantity of operation modes
This function enables user to set if ,after pressing key, all operating
modes will be accessible (ALL) or only one from the list chosen and
used by operator.
Procedure:
• Enter the submenu <P4.Func> and then:
After choosing setting press key. The program will return
to displaying name of submenu <P4.1.FFun>.
Return to weighing:
See 10.2.2.
- 44 -
To Next Page
Loading...
