• Remove discharged and then insert new batteries into the chamber,
according to given polarity (+/-):
• Close the lid of the chamber for batteries:
In PUE C/31H and PUE C/31H/Z weighing indicators
(stainless steel housing) the worn out accumulator can
be exchanged to a new one by the authorized service
of the manufacturer.
2.3. Operation in a strong electrostatic field
If the device is about to operate in a strong electrostatic field
(e.g. printing houses etc.) it should be connected to the earthing.
Connect it to the clamp terminal signed
.
- 8 -
To Next Page
Loading...
