15.3. Counting pieces of the same mass
Standard solution is equipped with option of counting small pieces of the
same mass. It is possible to execute a tare function in this operating mode
in order to tare a container value.
Notice:
1. Counting pieces does not work together with other scale functions,
2. The counting pieces function is not saved as a default start function
so it is not remembered after restarting.
Procedure:
• Enter to <PcS> function:
• You will see a blinking value of sample quantity.
• Press
key to start setting quantity of sample, you have a few
options to chose from:
- 45 -
To Next Page
Loading...
