Raidon SR6600 Series - Information and Monitoring

2.6.5 NTP Conguration
YoucansetsystemtimebyNTPconguration
2.6.6 View Events/Mute Beeper
It shows all RAID system events and mute beeper.
2.6.7 Generate Test Event
Usethisfeaturetogenerateaneventtotesttheemailaddresswhichconguresbythe“AltertbyMail
Cong”option.
2.6.8 Clear Event Buffer
Use this feature to clear the entire events buffer information.
2.6.9 Modify Password
You can use this function to modify password.
2.6.10 Upgrade Firmware
Wesuggestyouthatdonotupdatermwareifyoursystemrunsnormally,however,ifitisnecessary,
please refer to the appendix A Upgrading Flash Firmware programming.
2.6.11 Restart the Controller
Restart the RAID controller.
Notes : The controller should only be restarted when the system is not being accessed.
2.7 Information
It includes following information:
•RAIDSetHierarchy
•SystemInformation
•HardwareMonitor
2.7.1 RAID Set Hierarchy
Use this feature to view the current RAID set.
28 System Management