Rain Bird ESP-2WIRE - Display Indicators; Display Indicators Table; Basic Programming; Auto Mode

ESP-2WIRE Controller
10
Display Indicators
Display Function Description
ALL
ALL All stations
CLEARED
CLEARED
Programming was
cleared
CYCLIC
CYCLIC
Watering occurs at
specific intervals, such
as every 2 days
DELAY
DELAY Delay Watering Active
EVEN
EVEN Even days watering
FLOW
FLOW Flow Sensor
MV ON
MV ON
Master or Pump-start
relay is active
ODD
ODD Odd days watering
OFF
OFF
Controller will not
water
PERMOFF
PERMOFF
Permanent days off
for Odd, Even, Cyclic
watering
RAIN
RAIN Rain Sensor
RESTORD
RESTORD Programming restored
SAVED
SAVED Save programming
SENS
ON
SENS ON
Sensor will function if
wired
SEN OFF
SEN OFF
Sensor is ignored even
if wired
SKIP
SKIP
Station not used due to
station address config-
uration
SOAK
SOAK
Soak time between wa-
tering times - support-
ed through the Rain
Bird app.
Basic Programming
Auto Mode
AUTO
AUTO is the normal operating mode. Return the dial
to AUTO when programming is complete.
During Watering:
The display shows a blinking sprinkler symbol, the
active station number or program, and the remain-
ing run time.
Off
OFF
Turn the dial to OFF to stop automatic irrigation or
to cancel all active watering immediately.
NOTICE
Watering will NOT occur if the controller
remains in the OFF position.