INSTALLING THE TIMER
Note:
1) Turn o the garden faucet.
2) Wrap Teon Tape around the faucet threads.
3) Screw the timer to the garden faucet
and make the display as veical as
possible to the ground to prevent
rainwater from accumulating and
leaking into the interior.
4) Wrap Teon Tape around the threads
of the timer outlet.
5) Screw the garden hose to the timer
outlet.
6) Turn on the faucet after programming
the timer.
Tips: If the connection between the timer and the faucet or hose is not
tight or leaking, wrap more Teon Tape(thread seal tape) to make them
tight.
Please do not use tools, only install the timer by hand.
When expecting freezing temperatures, timers should be removed
from the hose faucet and stored indoors to avoid potential freeze
damage.
Please install the lter properly and
keep it clean as follows.
- 05 -
EN
To Next Page
Loading...
