RainPoint ITV105 - Programming Step 1: Set Clock; Setting Current Time

PROGRAMMING YOUR TIMER
1) Turn the dial to SET CLOCK.
2) Use the "+" and "-" buttons to set the current exact time, including
AM and PM.(US defaults to 12-hour clock, EU defaults to 24-hour
clock)
3) Use the "OK" button to conrm and switch between hours or
minutes.
4) Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
Tips: When the setup of this STEP is nished, please turn the dial to
save the changes instead of press the "OK" button. If you press
the "OK" button after setting, it will return to the previous setting
instead of saving it.
STEP 1: SET CLOCK
- 07 -
EN