RainPoint ITV205 - PRODUCT INSTALLATION; Installing the Batteries

EN
PRODUCT INSTALLATION
INSTALLING THE BATTERIES
Note:
Firmly restore the batte compament cover to ensure water
resistance.
When the timer is not used for a long time, please remove the
batteries and dispose of them properly.
Replace batteries when the low batte indicator appears on
display.
Don't dispose of batteries in re. Batteries may explode or leak.
To ensure a longer lifespan, please use 2 new AAA alkaline batteries
(not included). Don't mix new and old alkaline, standard (carbon-zinc)
or rechargeable batteries.
1) Remove the batte compament cover
on the back of the timer.
2) Inse 2 new AAA (1.5V) alkaline batteries
(not included).
3) Put the batte compament cover back
on the timer and press rmly to make
sure it is completely sealed.
- 04 -