R&M ControlMaster NXT - TAKING PRODUCT OUT OF OPERATION; Disposal of waste materials

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325
-
5319
20/21
R&M Materials Handling, I
nc. reserves the right to alter or amend the above information without notice.
7 TAKING PRODUCT OUT OF OPERATION
7.1 Disposal of waste materials
Waste material from installation, maintenance or dismantling shall be disposed of according to local regulations.
If the product is taken out of use, the metal and electrical parts should be
recycled.
In addition to local regulations, liquids like oil, grease and other chemicals
shall never be spilled onto the ground or soil. Used oil and grease shall be
stored in containers indicated for the purpose.