R&S SMA100B Getting Started

Preparing for Use
R&S
®
SMA100B
14Getting Started 1419.8620.02 ─ 07
Note the EMC classification in the data sheet.
4.1.2 Unpacking and Checking the Instrument
Unpack the R&S SMA100B carefully and check the contents of the package.
●
Check if all items listed on the delivery note, including this getting started
manual, are included in the delivery.
●
Check the R&S SMA100B for any damage.
If the contents are damaged, immediately contact the carrier who delivered
the package.
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped later, you can use the material to protect the control ele-
ments and connectors.
Risk of injury during transportation
The carrying handles at the front and side of the casing are designed to lift
or carry the instrument. Do not apply excessive force to the handles. If a
handle is ripped off, the falling instrument can cause injury.
4.1.3 Accessory List
The instrument comes with the following accessories:
●
Power cable
●
Getting Started printed manual
4.1.4 Placing or Mounting the Instrument
The R&S SMA100B is designed for use under laboratory conditions, either on a
bench top or in a rack using the standard rackmount kit.
Putting into Operation

R&S SMA100B Specifications

General

Brand	R&S
Model	SMA100B
Category	Portable Generator
Language	English