R&S SMA100B - Remote Operation over VNC

Instrument Control
R&S
®
SMA100B
58Getting Started 1419.8620.02 ─ 07
7.8 Remote Operation over VNC
The VNC is an application which can be used to access and control the instru-
ment from a remote computer through a LAN connection. While the instrument is
in operation, the instrument screen contents are displayed on the remote com-
puter, and VNC provides access to all applications, files, and network resources
of the instrument. Thus, remote operation of the instrument is possible.
Instrument control from a remote computer
To access the basic utility functions of the R&S SMA100B, perform a right
mouse click on the block diagram and select "Key Emulation".
A key panel to the right of the block diagram gives access to the utility func-
tions provided by the front panel keys.
The VNC is an add-on program, included in operating system Linux/Unix, and
available as a free-of-charge download on the internet.
For more information, refer to the R&S SMA100B user manual, chapter "How to
Set Up Remote Operation via VNC".
Remote Operation over VNC