Rane Performer - Page 31

31
Name Description Control Beats Parameter Depth
1 Backspin
Simulates a
turntable backspin.
When FX Depth
is centered, the
backspin length
is as shown by
the beat’s value.
Turn FX Depth
left or right to
decrease or
increase the
backspin length
respectively.
Paddle
Length
(in beats):
2, 4, 8
Default: 8
N/A
< 50% - the
Backspin
speed is
slower than
the speed as
shown by
the beat's
value. Beat
values less
than the
current beat
selection
are scaled
linearly from
50-0%.
50% - the
Backspin
speed is as
shown by the
beat's value.
>50% - the
Backspin
speed is
faster than
the speed as
shown by the
beat's value.
Beat values
greater than
the current
beat
selection are
scaled
linearly from
50-100%.
2 Beatbreak
Samples the 4
beats of each bar
of the original
signal and
replays them
(within the same
bar) according to
the selected
pattern. Turn FX
Depth to adjust
the balance of
the original and
the effected
signal in the mix.
Paddle Pattern:
1-10
Default: 1
HPF Cut
Off:
40 Hz,
80 Hz,
140 Hz,
244 Hz,
427 Hz,
748 Hz,
1308 Hz,
2287 Hz,
4000 Hz
Default:
244 Hz
0-100%
The effect
wet mix is
applied on a
linear scale.