Rane Performer - Page 33

33
Name Description Control Beats Parameter Depth
5 Brake
Simulates a vinyl
turntable stop.
When FX Depth is
centered, the
brake length is as
shown by the
beat’s value.
Turn FX Depth
left or right to
decrease or
increase the brake
length
respectively.
Paddle Beats:
1/2, 1, 2, 4, 8,
16, 32
Default: 2
N/A
< 50% - the
Brake speed
is slower than
the speed as
shown by the
beat's value.
Beat
values less
than the
current beat
selection are
scaled linearly
from 50-0%.
50% - the
Brake speed
is as shown
by the beat's
value.
>50% - the
Brake speed
is faster than
the speed as
shown by the
beat's value.
Beat values
greater than
the current
beat selection
are scaled
linearly from
50-100%.
6 Cyclone
Adds delays of
the original signal
at the specified
beat time or delay
time. Turn FX
Depth to adjust
the balance of the
original and the
effected signal in
the mix. Turn FX
Depth to the max
position to hold
the current delay
sample infinitely.
Paddle
Beats: 1/64,
1/32, 1/16,
1/8, 1/4, 1/3,
1/2, 3/4, 1,
3/2, 2, 3, 4
Default:
3/4
Delay Time:
5-400 ms
Default:
360 ms
0-100%
The effect
wet mix is
applied on a
linear scale.
As the effect
wet mix is
increased, the
program
signal is
reduced. Turn
Depth to the
max position
to hold the
current delay
sample.
7 Delay
Adds repeated
instances of the
original signal at
the specified
beat time. Turn
FX Depth to
adjust the
balance of the
original and
effected signal
in the mix.
Paddle
Beats:
1/32, 1/16,
1/8, 1/4,
1/3, 1/2,
3/4, 1, 2, 4
Default: 1
N/A 0-100%
The effect
wet mix is
applied on a
linear scale.
As it is
increased,
the program
signal is
reduced.