- 20 -
Example 2: Muffi ns
Select „Bakery Products“ mode
Select „baking“ – that’s it!
The unit right away works with preset, factory-
tested settings.
Alternatively, you have the option of making
individual changes to the degree of browning.
After preheating you can change the default
settings as desired within the fi rst 60 seconds.
Unit preheats automatically – display shows:
As soon as the preheat temperature is reached
display shows
Please use the positioning aid.
Please note that the core temperature probe must
be inserted when requested!
If the core temperature probe is not inserted or
incorrectly inserted (see chapter on Working with
Core Temperature Probe) the buzzer sounds and you
see an appropriate message on the display:
The cooking process continues once the probe
position has been corrected.
Note:
You can store your entries under an individual name
(see Programming chapter)
SelfCooking Control
®
Mode – Operation
1
baking
baking with
moisture
2
baking
light dark
1
preheat
Load
To Next Page
Loading...
