Commissioning 7
60
Example of field spreading during normal fertilising:
Figure 7.14: Field spreading during normal fertilisation
During field spreading in normal fertilising mode, a symmetrical spreading pattern
is produced. If the spreader is correctly set (see information in the fertiliser chart),
the fertiliser is evenly spread over the field.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters:
Type of fertiliser: KAS BASF
Application rate: 300 kg/ha
Working width: 24 m
Forward speed: 12 km/h
Mounting height: 50/50 (A = 50 cm, B = 50 cm)
Drop point: 6
Metering slide adjustment: 180
Spreading disc type: S4
Spreading disc speed 900 rpm
To Next Page
Loading...
