Rauch AXIS H EMC Series - Page 67

Commissioning
61
7
Example of limited border spreading in normal fertilisation mode:
Figure 7.15: Limited border spreading during normal fertilisation
During limited border spreading in normal fertilisation mode, almost no fertiliser
goes beyond the field boundary. Underfertilisation at the field boundary must be
accepted in this case.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters:
Type of fertiliser: KAS BASF
Application rate: 300 kg/ha
Working width: 24 m
Forward speed: 12 km/h
 Mounting height: 50/50 (A = 50 cm, B = 50 cm)
 Drop point: 6
 Metering slide adjustment: 180 left, 150 right
1
1. Recommended quantity reduction of 20 % on limited border spreading side

Spreading disc type: S4
 Spreading disc speed 900 rpm
 Limited border spreading disc speed: 600 rpm