Commissioning 7
62
Example of full border spreading during normal fertilisation:
Figure 7.16: Full border spreading during normal fertilisation
Full border spreading in normal fertilisation mode refers to a spreading process
in which a bit more fertiliser lands beyond the border of the field. Therefore, there
is just a slight underfertilisation at the field boundary.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters:
Type of fertiliser: KAS BASF
Application rate: 300 kg/ha
Working width: 24 m
Forward speed: 12 km/h
Mounting height: 50/50 (A = 50 cm, B = 50 cm)
Drop point: 6
Metering slide adjustment: 180
Spreading disc type: S4
Spreading disc speed 900 rpm
Limited border spreading disc speed: 600 rpm
To Next Page
Loading...
