Maintenance and service 12
134
Checking the oil level
Open the oil level checking screw.
The oil level is satisfactory when the oil reaches the lower edge of the hole.
12.13 Lubrication plan
[1] Oil level checking screw
Figure 12.32: Filling and draining points
Transmission oil
Lubrication points Lubricant Comment
Drive shaft Grease See operator’s manual of the manufacturer.
Metering slide, stop lever Grease, oil Ensure smooth movement and grease regularly.
Spreading disc hub Graphite grease Keep the threads and contact area clean and
grease regularly.
Agitator shaft, agitator fin-
gers
Graphite grease Grease before and after each spreading season.
Upper and lower hitch
balls
Grease Grease regularly.
Joints, bushes Grease, oil They are designed for dryness but can be slightly
lubricated.
To Next Page
Loading...
