Machine settings 8
68
8.4 Setting the working width
8.4.1 Spreading vane adjustment
Various spreading discs are available for implementation of the working width de-
pending on the fertiliser type.
Structure of spreading disc M1
There are two of the same spreading vanes on each spreading disc.
A spreading vane consists of a main vane and an extension vane.
The main vane on the right spreading disc is named BR and the correspond-
ing extension vane is named AR.
The main vane on the left spreading disc is named BL and the corresponding
extension vane is named AL.
Each spreading vane can be pushed forward or backward on the angle as
well as shortened or extended in length.
Spreading disc type Working width
M1 10 - 18 m
M1X 20 - 24 m
n WARNING
Risk of injury from rotating spreading discs!
The distribution unit (spreading disc, vanes) may catch and pull-in
body parts or objects. Contact with the distribution unit may injure,
crush or cut off body parts.
Maximum admissible mounting heights at front (V) and rear
(H) are to be complied with at all times.
Ensure that nobody is present in the hazard zone of the
machine.
Never remove deflectors mounted on the hopper.
To Next Page
Loading...
