Rauch MDS 8.2 - Connecting the Electronic Slide Actuators: Version C; Connecting the Electronic Metering Slide Actuator: Version Q

Commissioning
55
7
Position display
This display serves to identify the position of the metering slide from the driver’s
seat to avoid the unintentional loss of fertiliser.
Figure 7.13: Metering slide positions
[1] Completely opened
[2] Opened
[3] Closed
7.6.2 Connecting the electronic slide actuators: Version C
7.6.3 Connecting the electronic metering slide actuator: Version Q
1
2
3
NOTICE
The machines of the version C are equipped with electronic slide actuators.
The electronic slide actuator is described in a separate operator’s manual for the
E-Click operating unit. This operator’s manual is an integral part of the operat-
ing unit.
NOTICE
The machine version Q is equipped with an electronic metering slide actuator.
The electronic slide actuator is described in a separate operator’s manual for the
operating unit. This operator’s manual is an integral part of the operating unit.