Rauch MDS 8.2 - Running One Passage

Machine settings 8
74
8.5.2 Running one passage
Layout:
 Length of testing area: 60 to 70 m
Figure 8.13: Layout for one passage
Preparing one passage:
 Choose a similar fertiliser from the fertiliser chart and adjust the spreader ac-
cordingly.
 Set the mounting height of the machine as specified in the fertiliser chart.
Make sure that the mounting height includes the top edge of the trays.
 Check the spreading elements (spreading discs, spreader vanes, outlet) for
correct functioning and completeness.
 Place two collecting vessels one after another at a distance of 1 m in the over-
lap zones (between the tramlines) and one collecting vessel in the track (ac-
cording to figure 8.13
).
NOTICE
We recommend the layout plan up to a spreading width of 24 m. A layout plan
for greater working widths is attached to the PPS5 practise test kit.
1/2x 1/2x
x