Rauch MDS 8.2 - Technical Data of Basic Equipment

Technical data
27
4
4.3.2 Technical data of basic equipment
Dimensions:
Data
MDS 8.2 MDS 14.2 MDS 18.2 MDS 20.2
Overall width
108 cm 140 cm 190 cm 190 cm
Overall length
124 cm 128 cm 130 cm 130 cm
Filling height
(basic machine)
92 cm 104 cm 93 cm 101 cm
Distance between centre of gravity and
lower link coupling point
55 cm 55 cm 55 cm 55 cm
Filling width
98 cm 130 cm 180 cm 180 cm
Working width
a
10 - 24 m 10 - 24 m 10 - 24 m 10 - 24 m
PTO speed minimum
450 rpm 450 rpm 450 rpm 450 rpm
maximum
600 rpm 600 rpm 600 rpm 600 rpm
Rated speed
540 rpm 540 rpm 540 rpm 540 rpm
Capacity
500l 800l 700 l 900 l
Mass flow
b
maximum 250 kg/min 250 kg/min 250 kg/min 250 kg/min
Hydraulic pressure maximum
200 bar 200 bar 200 bar 200 bar
Sound pressure level
c
(in the closed driver's cab of the tractor)
75 dB(A) 75 dB(A) 75 dB(A) 75 dB(A)
a. Working width depending on fertiliser and spreading disc type (maximum 24 m)
b. Maximum mass flow depending on fertiliser type
c. Since the sound pressure level of the machine can only be determined when the tractor is running, the actual meas-
ured value is greatly dependent on the tractor type being used.