Calibration and discharging residual material 9
86
5. Set the metering slide stop end to the scale value from the fertiliser chart.
4.
Hang the calibration test
chute [1] under the left outlet.
Figure 9.6: Attach the calibration test
chute
NOTICE
The Q version machines include an electronic adjustment feature for the me-
tering slide opening.
The metering slide is automatically moved to the opening position by the
QUANTRON control unit if the calibration test function is selected.
Please observe the operating manual for the operating unit.
n WARNING
Risk of injury due to rotating machine components
Rotating machine components (universal drive shaft, hubs) may
catch and pull-in body parts or objects. Contact with rotating
machine components may cause bruises, abrasions and crushing
injuries.
Always stay outside the area of rotating hubs while the
machine is running.
When the drive shaft is rotating, the metering slides are to
be operated from the tractor seat at all times.
Ensure that nobody is present in the hazard zone of the
machine.
To Next Page
Loading...
