USER MANUAL – RCS
When in the parameter menu and you want to exit:
Press short on ON/OFF key and the display will show a parameter in the display – for instance: P01
Exit the parameter menu by push and hold the >0/T< button - to go out of the parameter menu
then perform a reboot ( see: important notes )
IMPORTANT NOTES:
After changing parameters the indicator needs a reboot by turning the indicator OFF and ON using
the ON/OFF button of the touch-panel
After changing the Peak Hold (parameter 17) - many other parameters will change as well – please
double check all settings
To Next Page
Loading...
Need help?
General