Install SC1™/TC1™ with DirecSteer
Note: This section only applies to DirecSteer kits with SC1™/TC1™ guidance. For RS1™
information, see "Install RS1™ with DirecSteer" on page35.
CAUTION
Do not connect the system power cable to the vehicle ignition or
battery until all system components are mounted and all elec-
trical connections are completed.
Install the SC1™/TC1™ Unit 56
Install the Antenna 58
Install the 500S™ Receiver 58
Install the 700S™ Receiver 59
Connect SC1™ Cabling to DirecSteer 59
Best Mounting Practices 60
Route the SC1™ Cabling to DirecSteer 61
Connect the 500S™/700S™ Antenna 69
Connect to Power 69
SC1™ and DirecSteer System Diagrams 71
55
Chapter 6:
Install SC1™/TC1™ with DirecSteer