Chapter1
l
Be alert and aware of surroundings while operating this Raven system.
l
Determine and remain a safe working distance from obstacles and bystanders.
The operator is responsible for disabling the system when a safe working dis-
tance has diminished.
l
Do not operate the implement on any public road with this Raven system
enabled.
l
Maintain control of the vehicle at all times during operation. For example,
l
Remain in the operator seat while the system is enabled and disable auto-
mated Raven controls before exiting the operator seat.
l
Maintain control of safety devices such as E-Stops at all times during oper-
ation.
l
Disable this Raven system prior to starting any maintenance work on the imple-
ment or components of this Raven system.
l
Do not attempt to modify or lengthen any of the system control cables. Extension
cables are available from a local Raven dealer.
Field Computers, Displays, and Control Consoles
l
If the display will not be used for an extended period, it is best to remove the display
from the machine and store it in a climate controlled environment. This may help to
extend the service life of electronic components.
l
To prevent theft, secure the display and GNSS antenna when leaving the machine unat-
tended.
WARNING
Hydraulic Safety
When installing or servicing a hydraulic system or hydraulic components, be aware that
hydraulic fluid may be extremely hot and under high pressure. Caution must be exercised.
l
Always wear appropriate personal protective equipment when installing or servicing
hydraulic systems.
l
Never attempt to open or work on a hydraulic system with the implement running.
l
Always take care when servicing or opening a system that has been pressurized.
2
To Next Page
Loading...
Need help?
General
