Raycus RFL-C2000S-HP - Page 29

Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide
RFL-C2000S-HP /RFL-C3000S-HP /RFL-C4000S-HP/RFL-C6000S-HP
29
1-The laser is emitting beam
Bit 16
0-Gate Mode Disabled
1-Gate Mode Enabled
Bit 17
Reserved
Reserved
Bit 18
0-External enable mode=off
1-External enable mode=on
Bit 19
0-Normal
1-Laser is Error
Bit 20
0-Slow rise and slow drop
mode off
1-Slow rise and slow drop
mode ON
Bit 21
0-The laser operates in "ON"
mode
1-The laser operates in
"REM" mode
Bit 22
0-Programming mode off
1-Programming mode on
Bit 23
Reserved
Reserved
Bit 24
0-Normal
1-Low temperature fault
Bit 25
0-Normal
1-Humidity alarm
Bit 26
0-Normal
1-Flow alarm of water flow
meter 1
Bit 27
0-Aimingbeam internal
control
1-Aimingbeamexternal
control
Bit 28
0-Normal
1-Flow alarm of water flow
meter 2
Bit 29
0-Normal
1-Critical Error
Bit 30
0-Optical Interlock OK
1-Optical Interlock active
Bit 31
0-Normal
1-Average power is too high