Raycus RFL-C2000S-HP - Page 31

Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide
RFL-C2000S-HP /RFL-C3000S-HP /RFL-C4000S-HP/RFL-C6000S-HP
31
Figure 9 Raycus software control menu
Table 11 Description of the main status display area of the laser
Power [%]
display of the currently set power percentage
Power[kW]
display of the current average output power of the laser in kW
Temperature
display of the current water-cooled plate temperature of the laser, in
degrees Celsius
Power indicator
Indicates the current status of the main power supply
Green - main power is on
Gray - main power is off
Ready indicator
Indicates the Ready status of the current laser
Green - the laser is ready to emit laser beam
Gray - the laser not ready
Alarm indicator
Indicates the current alarm state of the laser
Yellow - the laser is abnormal
Gray - the laser is not abnormal
Emission indicator
Indicates the current output state of the laser
Red - the laser is outputting laser beam
Gray - the laser is not outputting laser beam