Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C3300W~RFL-C15000W
2
1.2 Laser Safety Grade
According to European Standard EN 60825-1, Clause 9, this series of lasers
are Class 4 laser instruments. The product emits laser radiation at a wavelength of
1080 nm or around 1080 nm, and the average laser power radiated from the output
head is 3.3 kW to 15 kW (depending on the machine model), either directly or
indirectly exposed to high power laser radiation to the eye or skin damage.
Although the radiant laser is not visible, the beam will cause irreparable damage to
the retina or cornea, so appropriate and certified laser safety glasses must be worn
throughout the laser emitting .
WARNING: Users must use appropriate laser goggles when
operating this device. The laser goggles should be selected
according to the range of wavelength emitted from this
product. Users must ensure that the pretect range of laser
goggles over the entire range of laser wavelengths. Please do
not directly view the laser output head when laser emitting.
1.3 Optical Safety
Any dust on the end of the collimator assembly can damage the lens or the
entire laser device.
CAUTION: DO NOT emit when the protective cap is not
removed, otherwise the lens or crystal will be damaged.
1.4 Electrical Safety
1) Ensure the product is grounded through the PE line of the AC power cord.
The grounding must be firm and reliable.
WARNING: Any interruption from the protective earth will
electrify the enclosure, which may result in personal injury.
2) Ensure that the AC voltage is supplied normally.
To Next Page
Loading...
Need help?
General
