Raycus RFL-C6600S User Manual

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL- RFL-C6600S
7
Remove all the contents from the packing case. Take extra care when removing the unit out
of the packing case to ensure that thefiber optic cable is not twisted,hauled or damaged. A
comprehensive packing list is included with thesystem documentation. Check all items against
the list and contact Raycusimmediately if there is any missing item or evident damage to the unit.
DO NOT attempt to install or operate the laser, if there is any evident or suspected damage to the
unit.
It is recommended to keep the packing materials, as they will be necessary if you ever need
to ship the unit back for service at a later date.
CAUTION:The fiber optic cable and output head is precise optic
instrument, any vibration or impact to the output head, and twist or
excessive bend to the cable will damage the instrument.
2.4 Operation Environment
The basic operation conditions are listed in the table below:
Table 2 Basic Operation Conditions for the Laser
Model
RFL-C6600S
Supply Voltage(V)
380±15%Vac，50/60Hz
Supply Capacity(kW)
>22
Installation Requirements
Install on flat surface, no vibration or impact
Ambient Temperature(℃)
10~40
Relative Humidity(%)
30~70
Warning：
a) Ensure reliable grounded before using the laser.
b) The laser output is connected to the output cable. Please check the laser output carefully
to prevent dust or other contamination. Use special paper when cleaning the laser output
lens.
c) If the laser is used in accordance without the method specified in this manual, the laser
may be in abnormal working state and cause damage.
d) It is strictly forbidden to install the laser output when the laser is in operation.

Raycus RFL-C6600S Specifications

General

Brand	Raycus
Model	RFL-C6600S
Category	Industrial Equipment
Language	English