Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL- RFL-C6600S
9
2.5 Precautions for Use
a) Before supplying the power to the device, make sure that the correct voltage of the AC
power source is used. Failure to connect power source correctly will damage the
device;
b) Failure to follow the instructions may cause malfunction and damage to the device,
such damage is not covered by warranty.
c) It is very important to ensure the cleanness of the calibrated laser output head,
otherwise it will cause irreparable damage to the laser.
d) Please inspect the output head carefully for dust or other contaminations. Use
appropriate lens paper to clean it if necessary. Do not touch the output lens at any time;
as well as remember to cap the output head when it is not in use, and make sure the cap
is clean;
e) Failure to follow the specified instructions may result in the loss of laser power, and
such loss will not be covered by the warranty.
2.6 Specifications
The specifications are listed in the following table：
Table 4 Specifications
Continuous Wave / Modulated
To Next Page
Loading...
Need help?
General
